List of Publications - 2010
In 2010, CHEG faculty members and research Staff published 105 peer-reviewed journal papers, 20 conference papers and 3 books
Books
Y. Kahil, D. Laurence and A. S. Berrouk, Depot d’Aerosols dans une Conduite Coudée A 90°: Suivi de Particules dans un Ecoulement Turbulent avec Approche Lagrangienne, Saarbrucken, Germany, Editions Universitaires Européennes, 2010.
R. Gheshlaghi, Jeno Scharer, A. Elkamel, and M. Moo Young: “Modeling and Optimization of Protein Expression: Statistical Methods and Metabolic Flux Analysis for Optimization of Recombinant Protein Producyionby Fungal Platforms”, LAP lambert Academic Publishing, ISBN-13: 978-3838324395, ISBN-10: 3838324390, 180 pages, (2010).
K. Al-Qahtani and A. Elkamel: “Planning of Refinery and Petrochemical Operations”, Wiley-VCH Verlag, ISBN 978-3-527-32694-5, 195 pages, (2010)
M. Kutz and A. Elkamel, “Environmentally Conscious Fossil Energy Production”, John Wiley & Sons, Inc., ISBN 978-0-470-23301-6, 354 pages, (2010).
Edited collections: Books
V. Mittal, (Ed.), Advances in Polymer Nanocomposites Technology, New York, USA, Nova Science Publishers, 2010.
V. Mittal, (Ed.), Optimization of Polymer Nanocomposite Properties, Weinheim, Germany, Wiley VCH,2010.
V. Mittal, (Ed.), Barrier Properties of Polymer Nanocomposites, New York, USA, Nova Science Publishers, 2010.
V. Mittal, (Ed.), Advanced Polymer Nanoparticles: Synthesis and Surface Modification, Boca Raton, USA, Taylor and Francis, 2010.
V. Mittal, (Ed.), Advances in Polyolefin Nanocomposites, Boca Raton, USA, Taylor and Francis, 2010.
V. Mittal, (Ed.), Polymer Nanotube Nanocomposites: Synthesis, Properties and Applications, Salem, USA, Scrivener Publishing and John Wiley, 2010.
V. Mittal, (Ed.), Miniemulsion Polymerization Technology, Salem, USA, Scrivener Publishing and John Wiley, 2010.
V. Mittal, (Ed.), Polymer Nanocomposites by Emulsion and Suspension Polymerization, Cambridge, UK, Royal Society of Chemistry, 2010.
A. R. H. Goodwin, J. V. Sengers and C. J. Peters, (Eds.), Applied Thermodynamics of Fluids, Cambridge,UK, The Royal Society of Chemistry, 2010
Edited collections: Journals
V. Mittal, (Ed.), Polymers, Basel, Switzerland, MDPI, Special Issue, 2010.
C. McCabe and C. Peters, (Eds.), Fluid Phase Equilibria, The Netherlands, Elsevier, vol. 294, no.1 - 2, pp. 1-246, 2010.
S. Raeissi, M. C. Kroon and C. J. Peters, (Eds.), The Journal of Supercritical Fluids, The Netherlands,Elsevier, vol. 55, no.2, pp. 401-860, 2010.
Book Chapters
A. Younes, A. Elkamel and S. Areibi, “Genetic Algorithms in Process Enginering: Developments and Implementation Issues”, pages 111-145, appears in “Stochastic Global Optimization Techniques and Applications in Chemical Engineering”, World Scientific Press, Editor: G.P. Rangaiah, (2010).
A. Younes, A. Elkamel, and S. Areibi, “Meta-heuristic Techniques: Evaluation and Reporting Techniques”, pages 337-352, appear in “Stochastic Global Optimization Techniques and Applications in Chemical Engineering”, World Scientific Press, Editor: G.P. Rangaiah, (2010).
A. Elkamel, J.G. Ordorica-Garcia, P. Douglas, and E. Croiset, “Carbon Management and Hydrogen Requirements in Oil sands Operations”, appears as Chapter 2 (pages 87-126) in: “Environmentally Conscious Fossil Energy Production”, Editors: M. Kutz and A. Elkamel, , John Wiley & Sons, Inc., 2010.
J.G. Ordorica-Garcia, A. Elkamel, P. Douglas, and E. Croiset, “Clean-Coal Technology: gasification Pathway”, appears as Chapter 7 (pages 243-276) in: “Environmentally Conscious Fossil Energy Production”, Editors: M. Kutz and A. Elkamel, John Wiley & Sons, Inc., 2010.
A. Elkamel, H. Hashim, P. Douglas, and E. Croiset, “An Integrated Approach for carbon Mitigation in the Electric Power generation Sector”, appears as Chapter 8 (pages 277-212) in: “Environmentally Conscious Fossil Energy Production”, Editors: M. Kutz and A. Elkamel, , John Wiley & Sons, Inc., 2010.
A. Elkamel, H. Mirzaesmaeeli, E. Croiset, P.L. Douglas, "Energy Supply Planning for the Introduction of Carbon Dioxide (CO2) Capture Technologies”, appears as Chapter 4 (pages 93 – 151) in Developments and Innovation in Carbon Capture and Storage Technology, Editor: Mercedes Maroto-Valer, CRC Press, New York, (2010).
I. G. Economou, “Cubic and generalized van der Waals equations of state”, in Applied Thermodynamics of Fluids, A. R. H. Goodwin, J. V. Sengers and C. J. Peters (Eds.), 2010, pp. 53 – 83.
V. Mittal, “Advances in surface functionalization of carbon nanotubes”, in Advances in Nanotechnology, Z. Bartul and J. Trenor, (Ed.), New York, USA, Nova Science Publishers, 2010, pp. 1-24.
V. Mittal, “Advanced clay surface modification approaches”, in Advances in Polymer Nanocomposites Technology, V. Mittal, (Ed.), New York, USA, Nova Science Publishers, 2010, pp. 172-193.
V. Mittal, “Polymer nanocomposites technology: An overview”, in Advances in Polymer Nanocomposites Technology, V. Mittal, (Ed.), New York, USA, Nova Science Publishers, 2010, pp. 1-30.
V. Mittal, “Prediction of nanocomposite properties”, in Advances in Polymer Nanocomposites Technology, V. Mittal, (Ed.), New York, USA, Nova Science Publishers, 2010, pp. 325-350.
V. Mittal, “Polymer nanocomposites: Synthesis, microstructure and properties”, in Optimization of Polymer Nanocomposite Properties, V. Mittal, (Ed.), Weinheim, Germany, Wiley VCH, 2010, pp. 1-19.
V. Mittal, “Barrier properties of composite materials”, in Barrier Properties of Polymer Nanocomposites, V. Mittal, (Ed.), New York, USA, Nova Science Publishers, 2010, pp. 1-18.
V. Mittal, “Compatibilization of interfaces in nanocomposites: Route towards better barrier properties”, in Barrier Properties of Polymer Nanocomposites, V. Mittal, (Ed.), New York, USA, Nova Science Publishers, 2010, pp. 19-40.
V. Mittal, “Barrier properties of polyolefin nanocomposites”, in Barrier Properties of Polymer Nanocomposites, V. Mittal, (Ed.), New York, USA, Nova Science Publishers, 2010, pp. 95-118.
V. Mittal, “Barrier resistance generation in polymer nanocomposites”, in Optimization of Polymer Nanocomposite Properties, V. Mittal, (Ed.), Weinheim, Germany, Wiley VCH, 2010, pp. 173-193.
V. Mittal, “Polymer latex technology: An overview”, in Advanced Polymer Nanoparticles: Synthesis and Surface Modifications, V. Mittal, (Ed.), Boca Raton, USA, Taylor and Francis, 2010, pp. 1-28.
V. Mittal, “Functional polymer particles by emulsifier-free polymerization”, in Advanced Polymer Nanoparticles: Synthesis and Surface Modifications, V. Mittal, (Ed.), Boca Raton, USA, Taylor and Francis,
2010, pp. 307-328.
V. Mittal, “Polypropylene nanocomposites with clay treated with thermally stable imidazolium modification”, in Advances in Polyolefin Nanocomposites, V. Mittal, (Ed.), Boca Raton, USA, Taylor and Francis, 2010,
pp. 265-284.
V. Mittal, “Polyolefin nanocomposites technology”, in Advances in Polyolefin Nanocomposites, V. Mittal, (Ed.), Boca Raton, USA, Taylor and Francis, 2010, pp. 1-24.
V. Mittal, “Carbon nanotubes: An introduction”, in Polymer Nanotube Nanocomposites: Synthesis, Properties, and Applications, V. Mittal, (Ed.), Salem, USA, Scrivener Publishing and John Wiley, 2010, pp. 1-14.
V. Mittal, “Overview on polymer nanotube nanocomposites”, in Polymer Nanotube Nanocomposites: Synthesis, Properties, and Applications, V. Mittal, (Ed.), Salem, USA, Scrivener Publishing and John Wiley, 2010, pp. 15-44.
V. Mittal, “Miniemulsion polymerization: An overview”, in Miniemulsion Polymerization Technology, V. Mittal, (Ed.), Salem, USA, Scrivener Publishing and John Wiley, 2010, pp. 1-24.
V. Mittal, “Structured copolymer particles by miniemulsion polymerization”, in Miniemulsion PolymerizationTechnology, V. Mittal, (Ed.), Salem, USA, Scrivener Publishing and John Wiley, 2010, pp. 43-70.
V. Mittal, “Polymer nanocomposites in emulsion and suspension : An overview”, in Polymer Nanocomposites by Emulsion and Suspension Polymerization, V. Mittal, (Ed.), Cambridge, UK, Royal Society of Chemistry, 2010, pp. 1-31.
E. Kühne, G. J. Witkamp and C. J. Peters, “Ionic liquids and carbon dioxide as combined solvents for reactions and separations: ‘The miscibility switch’”, in Current Trends of Supercritical Fluid Technology in Pharmaceutical, Nutraceutical and Food Processing Industries, A. R. C. Duarte and C. M. M. Duarte,
(Eds.), Sharjah, UAE, Bentham, 2010
A. M. Martinez and C. J. Peters, “Fundamental considerations”, in Applied Thermodynamics of Fluids, A.R. H. Goodwin, J. V. Sengers and C. J. Peters (Eds.), 2010, pp. 5 – 32.
M. C. Kroon and C. J. Peters, “Phase behaviour of ionic liquid systems”, in Applied Thermodynamics of Fluids, A. R. H. Goodwin, J. V. Sengers and C. J. Peters (Eds.), 2010, pp. 368 – 393.
N. Balasubramanian and C. Srinivaskannan, “Electrocoagulation/electrofloatation - Fundamentals, present and future perspectives”, in Electrolysis: Theory, Types and Application, S. Kuai and J. Ming, (Eds.), USA, Nova Science Publishers, 2010.
C. L. Wu and A. S. Berrouk, “Particle collision handling for hard-sphere discrete particle model”, in Powder Engineering: Technology and Applications, J. M. Barker, (Ed.), New York, USA, Nova Science Publishers, 2010, pp. 162-18
Theses and dissertations
B. Breure, “Kinetic separation of vaporous alcohol-water mixtures: modeling, experiments, feasibility study”, Ph.D. thesis, Department of Chemical Engineering and Chemistry, Eindhoven University of Technology, Eindhoven, The Netherlands, 2010.
F. M. Vargas, “Modeling of asphaltene precipitation and arterial deposition”, Ph.D. thesis, Department of Chemical and Biomolecular Engineering, Rice University, Houston, USA, 2010.
Journal articles
N. OmidbakhshG, T.A. Duever, A. ElkamelC and P. M. Reilly,”Combining Design of Experiments Techniques, Connectionist Models, and Optimization for the Efficient Design of New Product Formulations”, Chemical Product and Process Modeling, Volume 5, Issue 1, Article 11, pages 1-18, (2010).
R.B. ZapataG, A.L. Villa, C.M., De Correa, L. Ricardez-SandovalC, and A. Elkamel, “Dynamic Modeling and Optimization of a Batch Reactor for Limonene Epoxidation”, Industrial & Engineering Chemistry Research, 49 (18), pages 8369 – 8378, (2010).
G. ZahediC, A. Elkamel, A. Lohi, and T. Hatami, “Optimization of Supercritical Extraction of Nimbin from Neem Seeds in Presence of Methanol as Co-Solvent”, The Journal of Supercritical Fluids, 55 (1), pages 142 – 148, (2010).
A. LeirasG, A.ElkamelC, and S. Hamacher, “Strategic Planning of Integrated Multirefinery Networks: A Robust Optimization Approach Based on the Degree of Conservatism”, Industrial & Engineering Chemistry Research, 49, pages 9970 – 9977, (2010).
H. Al-Ali, Y. SaifP,C, A. Elkamel, and A. Lohi, “Integrating Renewable and Nonrenewable Energies in Power Plant Planning”, American J. of Engineering and Applied Sciences, 3 92), pages 333 – 341, (2010).
M. BiglariP,C, A. LangstaffG, and A. Elkamel, “The Application of Response Surface Methodology for the Optimization of an Extractive Distillation Process”, Petroleum Science and Technology, 28, pages 1788 – 1798, (2010).
K. Al-QahtaniG and A. ElkamelC , “Robusr Planning of Multisite Refinery Networks: Optimization under Uncertainty” Computers and Chemical Engineering, 34, pages 985 – 995, (2010).
H. MirzaesmaeeliG, A. ElkamelC, P.L. Douglas, and E. Croiset, “A Multi-Period Optimization Model for Energy Planning with CO2 Emission Consideration”, Journal of Environmental Management, 91, pages 1063-1070, (2010).
A. K. AlshehriG, L. A. Ricardez-SandovalC, A. Elkamel, “Designing and Testing a Chemical Demulsifier Dosage Controller in a Crude Oil Desalting Plant: An Artificial Intelligence Based Network Approach”, Chemical Engineering Technology, 33, No. 6, pages 973-982, (2010).
A. YounesP,C ,W. WongratG, A. Elkamel, P. L. Douglas, and A. Lohi, “Generalized Disjunctive Programming for Synthesis of Rice Drying Processes”, Industrial & Engineering Chemistry Research, 49, pages 2312-2325, (2010).
G. Ordorica-GarciG , A. ElkamelC, P.L. Douglas, and E. Croiset, “Optimal implementation of CO2 capture technology in power and hydrogen production for oil sands operations”, Canadian Journal of Chemical Engineering, Vol. 88, pages 881 – 888, (2010).
C.S. KhorC and A. Elkamel, “Superstructure Optimization for Oil Refinery design”, Petroleum Science and Technology, 28, pages 1457 – 1465, (2010).
A. LeirasG, S. Hamacher, and A. ElkamelC, “Petroleum Refinery Operational Planning using Robust Optimization”, Engineering Optimization, Vol. 42, No. 12, pages 1119 – 1131, (2010).
C.R. MadhuranthakamP, J. S. MandurG, A.ElkamelC, H.Budman, “Optimal PID Controller Parameters for FOPTD and SOPTD Systems using a Connectionist Approach”, Engineering Optimization, Vol. 42, No. 3, pages 295-303, (2010).
N. OmidbakhshG, T.A. DueverC, A. Elkamel and P. M. Reilly,”A Systematic Statistical based Approach for Product Design: Application to Disinfectant Formulations”, Industrial & Engineering Chemistry Research, 49, pages 204-209, (2010).
N. OmidbakhshG, T.A. DueverC, A. Elkamel and P. M. Reilly,” A Bayesian Experimental Design Approach for Assessing New Product Performance: An Application to Disinfectant Formulation.”, Canadian Journal of Chemical Engineering, Volume 88, Issue 1, pages 88-94, (2010).
W. Al-GherwiG, H. BudmanC, and A. Elkamel, “Selection of Control Structure for Distributed Model Predictive Control in the Presence of Model Errors”, Journal of Process Control, 20, pages 270-284, (2010). Appears on the list of "Top 25 Hottest Articles on ScienceDirect.co.
A. HajimiraghaG, C. A. CañizaresC, M. Fowler, and A. Elkamel, “Optimal Transition to Plug-in Hybrid Vehicles in Ontario-Canada Considering the Electricity Grid Limitations,” IEEE Transactions on Industrial Electronics, special issue on “Plug-in Hybrid Electric Vehicles”, Vol. 57, No. 2, pp. 690-701, (2010). Recognized among the most cited papers of the IEEE Transactions on Industrial Electronics (ranked 15 out of 473 papers published in 2010).
R. ElshereefP, J. Vlachopoulos, and A. ElkamelC, “Comparison and Analysis of Bubble Growth and Foam Formation Models”, Engineering Computations, Vol. 27, Issue 3, pages 387 – 408, (2010).
S.M. HosseiniG, A.R. MoghadassiC, D. Henneke, and A. Elkamel, “The Thermal Conductivities Enhancement of Mono Ethylene Glycol and Paraffin Fluids by Adding β-SiC Nanoparticles”, Journal of Thermal Analysis and Calorimetry, 101, pages 113 - 118, (2010).
G. Al-SharrahC, A. Elkamel, and A. AlmanssoorG, “Sustainability indicators for decision-making and optimisation in the process industry: The case of the petrochemical industry”, Chemical Engineering Science, Volume 65, Issue 4, pages 1452-1461, (2010).
I. KantorG,C, M.W. Fowler, A. HajimiraghaG, and A. Elkamel, “Air quality and environmental impacts of alternative vehicle technologies in Ontario, Canada”, International Journal of Hydrogen Energy, 35, pages 5145 - 5153, (2010).
G. Zahedi, A. Elkamel, and A. Lohi, “Genetic Algorithm Optimization of Supercritical Fluid Extraction of Nimbin from Neem seeds”, Journal of Food Engineering, 97, pages 127-134, (2010).
H. Kim, A. Abdala, and C. Macosko, “Graphene/Polymer nanocomposites”, Macromolecules, vol. 43, no. 16, pp. 6515-6530, 2010.
S. Mahammad, A. A. Abdala, G. Roberts and S. Khan, “Manipulation of hydrophobic interactions in associative polymers using cyclodextrin and enzyme”, Soft Matter, vol. 6, no. 21, pp. 4237-4245, 2010.
A. S. Al-Shoaibi and A. M. Dean, “Kinetic analysis of C4 alkane and alkene pyrolysis: Implications for SOFC operation”, J. Fuel Cell Sci. Technol., vol. 7, no. 4, pp. 041015-1- 041015-8, 2010.
M. ElKadi, A. Pillay, S. C. Fok, F. Feghali, G. Bassioni and S. Stephen, “Depth profiling (ICP-MS) study of toxic metal buildup in concrete matrices: Potential environmental impact”, Sustainability, vol. 2, no. 10, pp. 3258-3269, 2010.
A.Pillay, M. ElKadi, S. C. Fok, F. Feghali, G. Bassioni and S. Stephen, “Tracking chloride and metal B diffusion in proofed and unproofed concrete matrices using ablative laser technology (ICP-MS)”, Natural Science, vol. 2, no. 8, pp. 809-816, 2010.
G. Bassioni, “The influence of cement composition on superplasticizers’ efficiency”, International Journal of Engineering, vol. 3, no. 6, pp. 577-587, 2010.
G. Bassioni, “Mechanistic aspects on the influence of inorganic anion adsorption on oilfield scale”, Journal of Petroleum Science and Engineering, vol. 70, pp. 298-301, 2010.
G. Bassioni, “Production chemicals for the oil and gas industry (book review)”, International Review of Chemical Engineering (Rapid Communications), vol. 2, no. 3, pp. 475-477, 2010.
G. Bassioni, A. Pillay, M. ElKadi, S. C. Fok, F. Feghali and S. Stephen, “Tracking traces of transition metals present in concrete mixtures by inductively-coupled plasma mass spectrometry studies”, European Journal of Mass Spectrometry, vol. 16, no. 6, pp. 679-692, 2010.
A. S. Berrouk and C. L. Wu, “Two-dimensional discrete particle model: Comments on the numerical simulation of cluster flow behavior in the riser of circulating fluidized beds”, Chemical Engineering Journal, vol. 160, no. 2, pp. 810-811, 2010.
A. S. Berrouk, “Turbulence modulation of dense two-phase flows: Comment on Modeling of dense gasparticle flow in a circulating fluidized bed by distinct cluster method (DCM)”, Powder Technology, vol. 201, no. 1, pp. 104-105, 2010.
A. S. Berrouk and C. L. Wu, “Large eddy simulation of dense two-phase flows: Comment on [DEM-LES,study of 3-D bubbling fluidized bed with immersed tubes”, Chemical Engineering Science, vol. 65, no. 5, pp.1902-1903, 2010.
C. L. Wu and A. S. Berrouk, “Conceptual comparative study between efficient collision-handling algorithms used for molecular dynamics (MD) and discrete particle model (DPM)”, Powder Technology, vol. 198, no. 3,pp.435-438, 2010.
A. S. Berrouk, A. C. K. Lai, A. C. T. Cheung and S. L. Wong, “Experimental measurements and large eddy simulation of expiratory droplet dispersion in a mechanically ventilated enclosure with thermal effects”,Building and Environment, vol. 45, no. 2, pp.371-379, 2010.
C. L. Wu, A. S. Berrouk and K. Nandakumar, “An efficient chained-hash-table strategy for collision handling in hard-sphere discrete particle modelling”, Powder Technology, vol. 197, no. 1-2, pp. 58-67,2010.
M. I. Khan, A. U. Chaudhry, S. Hashim, M. K. Zahoor and M. Z. Iqbal, “Recent developments in intrinsically conductive polymer coatings for corrosion protection”, Chemical Engineering Research Bulletin, vol. 14, no. 2, pp. 73-86, 2010.
M. I. Khan, A. U. Chaudhry, S. Hashim and M. Z. Iqbal, “Investigation of corrosion-protective performance of polyaniline covered inorganic pigments”, The Nucleus Journal of Pakistan Atomic Energy Commission, vol. 47, no. 4, pp. 287-293, 2010.
M. Mohammad, S. Maitra, N. Ahmad, A. Bustam, T. K. Sen and B. K. Dutta, “Metal ion removal from aqueous solution using physic seed hull”, Journal of Hazardous Materials, vol. 179, no., pp. 353-372, 2010.
S. Maitra, F. Ahmad, A. Das, S. Das and B. K. Dutta, “Effect of curing conditions and ionic additives on properties of fly ash-lime compacts”, Bulletin of Materials Science, vol. 33, no. 2, pp. 185-190, 2010.
S. Harimurti, B. K. Dutta, I. Ariff and S. Chakrabarti, “Degradation of monoethanolamine in aqueous solution by Fenton’s reagent with biological post-treatment”, Water, Air, & Soil Pollution, vol. 211, no. 1-4,pp. 273-286, 2010.
R. Dutta, S. S. Mohammad, S. Chakrabarti, B. Chaudhuri, S. Bhattacharjee and B. K. Dutta, “Reduction of hexavalent chromium in aqueous medium with zerovalent iron”, Water Environment Research, vol. 82, no.2, pp. 138-146, 2010.
B. K. Dutta, S. Harimurti, I. F. M. Ariff, S. Chakrabarti and D. Vione, “Degradation of diethanolamine by Fenton’s reagent combined with biological post-treatment”, Desalination and Water Treatment, vol. 19, pp. 286-293, 2010.
T. K. Sen, M. Mohammod, S. Maitra and B. K. Dutta, “Removal of cadmium from aqueous solution using castor seed hull: A kinetic and equilibrium study”, Clean Soil Air Water, vol. 38, pp. 850-858, 2010.
N. M. Garrido, M. Jorge, A. J. Queimada, I. G. Economou and E. A. Macedo, “Molecular simulation of the hydration Gibbs energy of barbiturates”, Fluid Phase Equil., vol. 289, pp. 148-155, 2010.
P. Ahlström, K. Aim, R. Dohrn, J. R. Elliott, G. Jackson, J. N. Jaubert, E. A. Macedo, J. P. Pokki, K. Reczey, A. Victorov, L. Fele Žilnik, and I. G. Economou, “A survey of the role of thermodynamics and transport properties in ChE university education in Europe and the USA, Chem. Eng. Ed., vol. 44, no. 1, pp. 35-43,2010.
M. Jorge, N. M. Garrido, A. J. Queimada, I. G. Economou and E. A. Macedo, “Effect of the integration method on the accuracy and computational efficiency of free energy calculations using thermodynamic integration”, J. Chem. Theory Comput., vol. 6, no. 4, pp. 1018-1027, 2010.
E. Androulaki, S. Lambropoulou, I. G. Economou and J. H. Przytycki, “Inductive construction of 2- connected graphs for calculating the virial coefficients”, J. Phys. A: Math. Theor., vol. 43, no. 31, pp.315004, 1-20, 2010.
N. M. Garrido, M. Jorge, A. J. Queimada, I. G. Economou and E. A. Macedo, “Molecular simulation of absolute hydration Gibbs energies of polar compounds”, Fluid Phase Equil., vol. 296, pp. 110-115, 2010.
I. G. Economou, N. M. Garrido and Z. A. Makrodimitri, “Prediction of microscopic structure and physical properties of complex fluid mixtures based on molecular simulation”, Fluid Phase Equil., vol. 296, pp. 125- 132, 2010.
G. M. Kontogeorgis, I. Tsivintzelis, N. von Solms, A. Grenner, D. Bøgh, M. Frost, A. Knage-Rasmussen and I. G. Economou, “Use of monomer fraction data in the parametrization of association theories”, Fluid Phase Equil., vol. 296, pp. 219-229, 2010.
E. Hendriks, G. M. Kontogeorgis, R. Dohrn, J. C. de Hemptinne, I. G. Economou, L. Fele Žilnik and V. Vesovic, “Industrial requirements for thermodynamics and transport properties”, Ind. Eng. Chem. Res., vol.49, no. 22, pp. 11131-11141, 2010.
G. M. Kontogeorgis and I. G. Economou, “Equations of state: from the ideas of van der Waals to association theories”, J. Supercrit. Fluids, vol. 55, pp. 421-437, 2010.
G. C. Boulougouris, L. Peristeras, I. G. Economou and D. N. Theodorou, “Predicting fluid phase equilibrium via histogram reweighting with Gibbs ensemble Monte Carlo simulation”, J. Supercrit. Fluids, vol. 55, pp. 503-509, 2010.
G. P. Lithoxoos, A. Labropoulos, L. Peristeras, N. Kanellopoulos, J. Samios and I. G. Economou,“Absorption of N2, CH4, CO and CO2 Gas in single walled carbon nanotubes. A combined experimental and Monte Carlo molecular simulation study”, J. Supercrit. Fluids, vol. 55, pp. 510-523, 2010.
M. Yiannourakou, I. G. Economou and I. A. Bitsanis, “Structural and dynamical analysis of monodisperse and polydisperse colloidal systems”, J. Chem. Phys., vol. 133, no. 22, pp. 224901-1 – 224901-10, 2010.
T. Feital, U. Kruger, U. Schubert, E. L. Lima and J. C. Pinto, “Maximum likelihood PCA for multivariate statistical process monitoring”, Chemometrics & Intelligent Laboratory Systems, vol. 104, no. 2, pp. 223-232, 2010.
Z. Zhang, U. Kruger, X. Wang and D. Chen, “An introduction into principal Riemannian curves”,International Journal of Neural Systems, vol. 20, no. 3, pp. 209-218, 2010.
**Z. Ge, U. Kruger, L. Lamont, L. Xie and Z. Song, “Fault detection in non-Gaussian vibration systems using dynamic statistical-based approaches”, Mechanical Systems and Signal Processing, vol. 24, no. 8,pp. 2972-2984, 2010.
V. Mittal, “Synthesis of environmentally responsive polymers by atom transfer radical polymerization: Generation of reversible hydrophilic and hydrophobic surfaces”, Polymers, vol. 2, no. 2, pp. 40-56, 2010.
V. Mittal, A. Voelkel and H. Coelfen, “Analytical ultracentrifugation of model nanoparticles: Comparison of different analysis methods”, Macromolecular Bioscience, vol. 10, no. 7, pp. 754-762, 2010.
V. Mittal and M. D. Lechner, “Size and density dependent sedimentation analysis of advanced nanoparticle systems”, Journal of Colloid and Interface Science, vol. 346, no. 2, pp. 378-383, 2010.
V. Mittal, “Sedimentation analysis of organic-inorganic hybrid colloids”, Colloid and Polymer Science, vol.288, no. 6, pp. 621-630, 2010.
V. Mittal, “Permeation properties of castings of epoxy and polyurethane layered silicate nanocomposites”, Nanotechnology Research Journal, vol. 3, no. 3, pp. 1-22, 2010.
C. J. Peters, M. C. Kroon and S. Raeissi, Preface, Journal of Supercritical Fluids, vol. 55, pp. 401 - 402, 2010.
S. Raeissi, L. Florusse and C. J. Peters, “Scott-van Konynenburg phase diagram of carbon dioxide + alkylimidazolium-based ionic liquids”, Journal of Supercritical Fluids, vol. 55, pp. 825-832, 2010.
H. Perrotin-Brunel, M. C. Kroon, M. J. E. van Roosmalen, J. van Spronsen, C. J. Peters and G. J. Witkamp, “Solubility of non-psychoactive cannabinoids in supercritical carbon dioxide and comparison with psychoactive cannabinoids”, Journal of Supercritical Fluids, vol. 55, pp. 603-608, 2010.
K. S. Abdulkadirova, C. J. Peters, J. V. Sengers and M. A. Anisimov, “An isomorphic Peng-Robinson equation for phase-equilibria properties of hydrocarbon mixtures in the critical region”, Journal of Supercritical Fluids, vol. 55, pp. 594-602, 2010.
H. Perrotin-Brunel, M. J. E. Van Roosmalen, M. C. Kroon, J. Van Spronsen, G. J. Witkamp and C. J. Peters, “Solubility of cannabinol in supercritical carbon dioxide”, Journal of Chemical and Engineering Data, vol. 55, no.9, pp. 3704-3707, 2010.
K. M. Sabil, A. R. C. Duarte, J. Zevenbergen, M. M. Ahmad, S. Yusup, A. A. Omar and C. J. Peters, “Kinetics of formation for single carbon dioxide and mixed carbon dioxide and tetrahydrofuran hydrates in water and sodium chloride aqueous solution”, International Journal of Greenhouse Gas Control, vol. 4, no.5, pp. 798-805, 2010.
M. C. Kroon, L. J. Florusse and C. J. Peters, “Phase behavior of the ternary 1-hexyl-3-methylimidazolium tetrafluoroborate + carbon dioxide + methanol system”, Fluid Phase Equilibria, vol. 294, no. 1-2, pp. 84-88, 2010.
S. Raeissi and C.J. Peters, “High pressure phase behaviour of methane in 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide”, Fluid Phase Equilibria, vol. 294, no.(1-2), pp. 67-71, 2010.
H. Komatsu, H., Yoshioka, M. Ota, Y. Sato, M. Watanabe, R. L. Smith and C. J. Peters, “Phase equilibrium measurements of hydrogen-tetrahydrofuran and hydrogen-cyclopentane binary clathrate hydrate systems”, Journal of Chemical and Engineering Data, vol. 55, no.6, pp. 2214-2218, 2010.
M. C. Kroon, L. J. Florusse, E. Kühne, G. J. Witkamp and C. J. Peters, “Achievement of a homogeneous phase in ternary ionic liquid/carbon dioxide/organic systems”, Industrial and Engineering Chemistry Research, vol. 49, no. 7, pp. 3474-3478, 2010.
K. M. Sabil, G. J. Witkamp and C. J. Peters, “Estimations of enthalpies of dissociation of simple and mixed carbon dioxide hydrates from phase equilibrium data”, Fluid Phase Equilibria, vol. 290, no. 1-2, pp. 109-114, 2010.
N. I. Papadimitriou, I. N. Tsimpanogiannis, A. K. Stubos, A. Martin, L. J. Rovetto and C. J. Peters, “Unexpected behavior of helium as guest gas in sII binary hydrates”, Journal of Physical Chemistry Letters, vol. 1, no. 6, pp. 1014-1017, 2010.
K. M. Sabil, G. J. Witkamp and C. J. Peters, “Measurement and modeling of bubble and dew points of the carbon dioxide + tetrahydrofuran + water system”, Journal of Chemical and Engineering Data, vol. 55, no.2,pp. 813-818, 2010.
K. M. Sabil, V. R. Román, G. J. Witkamp and C. J. Peters, “Experimental observations on the competing effect of tetrahydrofuran and an electrolyte and the strength of hydrate inhibition among metal halides inmixed CO₂ hydrate equilibria”, Journal of Chemical Thermodynamics, vol. 42, no 3, pp. 400-408, 2010.
H. Perrotin-Brunel, P. C. Perez, M. J. E. van Roosmalen, J. van Spronsen, G. J. Witkamp and C.J. Peters,“Solubility of Δ9-tetrahydrocannabinol in supercritical carbon dioxide: Experiments and modelling”, Journal of Supercritical Fluids, vol. 52, no.1, pp. 6-10, 2010.
K. M. Sabil, G. J. Witkamp and C. J. Peters, “Phase equilibria in ternary (carbon dioxide + tetrahydrofuran+ water) system in hydrate-forming region: Effects of carbon dioxide concentration and the occurrence of pseudo-retrograde hydrate phenomenon”, Journal of Chemical Thermodynamics, vol. 42, no 1, pp. 8-16, 2010.
Kunbin Yang, Jinhui Peng, Hongying Xia, C. Srinivasakannan and Shenghui Guo, “Textural Characteristics of Activated Carbon by Single Step CO2 Activation from Coconut Shells“, Journal ofTaiwanese Institution of Chemical Engineers, vol. 41, no. 3, pp. 367-372, 2010.
Zhengyong Zhang, Jinhui Peng, C. Srinivasakannan, Zebiao Zhang, Libo Zhang, Y. Fernández and J. A.Menéndez,, “Leaching zinc from spent catalyst: process optimization using response surface methodology”, Journal of Hazardous Materials, vol. 176 , no. 1-3, pp. 1113-1117, 2010.
Kunbin Yang, Jinhui Peng, C. Srinivasakannan, Hongying Xia, Libo Zhang and Xinhui Duan, “Preparation of high surface area activated carbon from coconut shells using microwave heating”, BioresourceTechnology, vol. 101 , no. 15, pp. 6163-6169, 2010.
R. Saravanathamizhan, N. Balasubramanian and C. Srinivasakannan, “RTD modeling for parallel plate electrochemical reactor”, Journal of modeling and simulation systems, vol. 1, no. 1, pp. 68-73, 2010.
J. Lim, C. Srinivasakannan and N. Balasubramanian, “Activation of palm shells by phosphoric acidimpregnation for high yielding activated carbon”, Journal of Analytical and Applied Pyrolysis, vol. 88, no. 2,pp. 181-186, 2010.
S. Tamilan, N. Balasubramanian and C. Srinivasakannan, “Comparison of tanks-in-series and axialdispersion models for an electrochemical reactor”, Journal of modeling and simulation systems, vol. 1, no.3, pp. 157-161, 2010.
C. Srinivasakannan and N. Balasubramanian, “Significance of indirectly heated gasifiers for generation of medium calorific value syngas through biomass gasification”, Energy Sources A: Recovery, Utilization, and Environmental Effects, vol. 32, no. 13, pp. 1579-1586, 2010.
C. Srinivasakannan and N. Balasubramanian, “Variations in the design of dual fluidized bed gasifiers and quality of syngas from biomass”, Energy Sources A: Recovery, Utilization, and Environmental Effects, vol.33, no. 4, pp. 349-359, 2010.
Bing Guo Liu, Jin Hui Peng, Li Bo Zhang, C. Srinivasakannan, Huang Min, Zhang Ze-Biao, Guo Sheng-Hui, “Microwave-absorbing characteristics and temperature increasing behavior of basic cobalt carbonatein microwave field”, Journal of Central South University Technology, vol. 17, pp. 1211-1215, 2010
F. M. Vargas, J. L. Creek and W. G. Chapman, “On the development of an asphaltene deposition simulator”, Energy & Fuels, vol. 24, no. 4, pp. 2294-2299, 2010.
F. M. Vargas and W. G. Chapman, “Application of the one-third rule in hydrocarbon and petroleumsystems”, Fluid Phase Equilibria, vol. 290, pp. 103-108, 2010.
B. Abu-Jdayil, F. Banat, M. AL-Sameraiy, Steady Rheological Properties of Rotating Biological Contactor (RBC) Sludge.J. Water Resource and Protection, 2, 1-7 (2010).
S. Al-Asheh, R. Juma, F. Banat, A. Al-Zou'bi, N. Al-Qutaish, Treatment of olive-mills effluent using electroosmosis dewatering, Desalination and Water Treatment (DWT 6382 ), 2010 Accepted.
S. Al-Asheh, F. Banat, F. Lattieff, Sorptive Storage of Natural Gas onto Dry and Wet Phillipsite: Study of Dynamics, Storage and Delivery, Applied Thermal Engineering 30 2257-2263 (2010).
F. Banat, N. Jwaied, Autonomous Membrane Distillation Pilot Plant Unit Driven by Solar Energy: Experiences and Lessons Learned. Int. J. of Sustainable Water & Environmental Systems 1 21-24 (2010).
T. Rababah, F. Banat, A. Rababah, K. Ereifej, and W. Yang, Optimization of Extraction Conditions of Total Phenolics, Antioxidant Activities, and Anthocyanin of Oregano, Thyme, and Pomegranate. Journal of Food Science 75 C626-C632 (2010).
Chen, Leslie Loo, and K. Wang, ‘Modeling diffusion anomalies in a CMS membrane ’, Chemical Product and Process Modeling, 5(1), 3, 2010.
E. Hu, Z. Lai, K. Wang, ‘Adsorption properties of SAPO-5 molecular sieve’, J. of Chem. & Eng. Data, 55 (9), 3286–3289, 2010
C. Li, S. Hein, and K. Wang, ‘Separation of GMP from Milk Whey Using Modified Chitosan Beads’, Adsorption, 16(1/2), 85-91, 2010.
Y. Wang, C. Li, K. Wang, X. Wang, ‘Reversible hydrogen storage of multi-wall carbon nanotubes doped with atomically dispersed lithium’, Journal of Material Chemistry, 20, 6490 – 6494, 2010.
D. Xu, Leslie Loo, K. Wang, ‘Pervaporation Performance of Novel Chitosan-POSS Hybrid Membranes: Effects of POSS and Operating Conditions’, J. of Polymer Science Part B: Polymer Physics, 48(21), 2185-2192, 2010.
C. Guan, Leslie Loo, K. Wang, C. Yang, ‘Methane storage in a carbon pellet derived via binderless method’, Energy Conversion & Management, 52, 1258, 2010.
Omer, Ali, Pal, R. (2010). “Pipeline flow behaviour of water-in-oil emulsions with and without a polymer additive in the aqueous phase”, Chemical Engineering and Technology, 33, 983-992.
Schiraldi, D. A.; Gawryla, M. D.; Alhassan, S., Clay Aerogel Composite Materials. Advances in Science and Technology 2010, 63, 147-151.
4. Agag, T.; Geiger, S.; Alhassan, S. M.; Qutubuddin, S.; Ishida, H., Low-Viscosity Polyether-Based Main-Chain Benzoxazine Polymers: Precursors for Flexible Thermosetting Polymers. Macromolecules 2010, 43 (17), 7122-7127.
5. Alhassan, S. M.; Qutubuddin, S.; Schiraldi, D., Influence of Electrolyte and Polymer Loadings on Mechanical Properties of Clay Aerogels. Langmuir 2010, 26 (14), 12198-12202.
N. Narender, K. Suresh Kumar Reddy, M. Arun Kumar, C. N. Rohitha and S. J. Kulkarni,“Tetrahydropyranilation of alcohols over modified zeolites”, Catalysis Letters, vol. 134, pp. 175-178, 2010.
Conference proceedings
L. AhmadiG,C, W. Unbangluang, E. Croiset, A. Elkamel, P.L. Douglas, E. Entchev, and H.M. Ku, “Forecasting the Impact of Plug-in Hybrid Electric Vehicles Penetration on Ontario’s Electricity Grid”, Proceedings of the ASME International Mechanical Engineering Congress & Exposition, IMEC 2010, pages 1 – 10, November 12 – 18, Vancouver, British Columbia, Canada, (2010).
D. Georgis, S. Jogwar, A. Almansoori and P. Daoutidis, “Design and control of an energy integrated solid oxide fuel cell system”, in American Institute of Chemical Engineers Annual Meeting, Salt Lake City, USA,
2010.
W. Hu, S. Azarm and A. Almansoori, “Approximation assisted multi-objective collaborative robust optimization (AA-McRO) under interval uncertainty”, in 13th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Forth Worth, USA, 2010
N. Al Amoodi, H. Selim, A. K. Gupta, M. Sassi and A. Al-Shoaibi, “Numerical simulations of the Claus process: Equilibrium and kinetic investigation”, in 48th AIAA Aerospace Sciences Meeting, Orlando,
Florida, USA, 2010.
H. Selim, A. Gupta and A. Al-Shoaibi, “Implementation of novel error propagation based reduction approach in H2S/O2 reaction mechanism”, in 48th AIAA Aerospace Sciences Meeting, Orlando, Florida, USA, 2010.
H. Selim, V. Vijayan, A. Al-Shoaibi and A. Gupta, “Numerical and experimental studies on mixing and products species distribution in a Claus reactor”, in 8th IECEC Meeting, Nashville, Tennessee, USA, 2010.
C. Xu, A. Al-Shoaibi, H. H. Castensen and A. M. Dean, “Kinetic modeling of ethane and propane pyrolysis at SOFC operating conditions”, in AIChE Annual Meeting, Salt Lake City, Utah, USA, 2010.
G. Bassioni and F. M. Vargas, “Determination of partial solubility parameters and improvement of Flory- Huggins based models for studying asphaltene stability in crude oils”, in 11th International Conference on Petroleum Phase Behavior and Fouling, New York, USA, 2010, pp. 2-70.
S. Maitra, A. Rahaman, R. Pyare, H. Mukhtar and B. K. Dutta, “Synthesis and characterization of bioactive glass ceramics”, in Advances in Bioceramics and Porous Ceramics II, Florida, USA, 2010, pp. 83-94.
I. G. Economou and Z. A. Makrodimitri, “The role of molecular thermodynamics and simulation in natural gas sustainable processes”, in Proceedings of the 2nd Annual Gas Processing Symposium, F. Benyahia and F. T. Eljack, (Eds.), The Netherlands, Elsevier Science B.V., 2010, pp. 299 – 309.
B. R. Palmer, C. Gutierrez, M. B. Gidas, A. Berrouk, M. W. H. Gawargy and M. M. Umer, “A zinc aluminate sorbent for dilute hydrogen sulfide capture”, in Sour Oil & Gas Advance Technology, Abu Dhabi, UAE, 2010, pp. 497-528.
C. Srinivasakannan and N. Balasubramanian, “Combined resistance heat transfer based bubbling bed model for moisture diffusion kinetics in fluidized beds”, in 5th International Conference on Thermal Engineeering: Theory and Application, Marrakesh, Morocco, 2010
Wah Ching Lim and C. Srinivasakannan, “Preparation and characterization of high surface area activated carbons from palm shells suitable for adsorption of higher molecular weight compounds”, in Carbon Conference, Clemson University, South Carolina, USA, 2010
D. L. Gonzalez, E. Mahmoodaghdam, F. Lim, N. Joshi and F. M. Vargas, “Experimental evaluation of the asphaltene stability prediction based on dead oil properties”, in 11th International Conference on Petroleum Phase Behavior and Fouling, New York, USA, 2010, pp. 1-8.
F. M. Vargas and G. Bassioni, “Application and experimental validation of the One-Third rule in determining viscosity and surface tension of crude oil systems”, in 11th International Conference on Petroleum Phase Behavior and Fouling, New York, USA, 2010, pp. 3-102.
A. S. Kurup, W. G. Chapman, F. M. Vargas, J. L. Creek, J. Wang, J. Buckley and H. J. Subramani, “Prediction of asphaltene deposition in well bores”, in AIChE Annual Meeting, Salt Lake City, USA, 2010
F. M. Vargas, S. Panuganti, D. L. Gonzalez and W. G. Chapman, “Advances in predicting asphaltene precipitation at high pressure and temperature”, in SPE Applied Technology Workshop on Asphaltene and Scale, Abu Dhabi, UAE, 2010
J. Ratulowski, D. L. Gonzalez, F. M. Vargas and E. Mahmood, “Experimental evaluation of the asphaltene stability prediction due to gas injection”, in SPE Applied Technology Workshop on Asphaltene and Scale, Abu Dhabi, UAE, 2010
Patents
R. Prud'Homme, I. Aksay, D. Adamson and A. Abdala, “Thermally exfoliated graphite oxide”, US Patent 7,658,901, 2010.
